Different types of RC tracks – Guide for newbies

As technology progresses , so does RC world. There are quite a few ways one can spend their afternoon with RC vehicles but taking them out to the track happens to my favorite.

Lets break it down, here are different types of RC tracks out there for beginners and expect hobbyist.

In any high-stakes race, your victory depends on the skill and your ability to adapt your vehicle according to the track.-

Here’s a list of different types of RC tracks

There are two main types of tracks:

On-road Tracks

On-road races happen on paved streets and proper roads.

RC vehicles are popular sports cars which can reach top speeds of 60 mph. Cars can be 4WD and are a lot fun to drive. You can typically make parking lots, or any street as your on road racing tracks.


Off Road Tracks

Things get really interesting when we talk about off-road tracks. From loose dirt and loam to rubber mats, off road tracks have seen huge evolution.

These severely test your abilities as a driver and rely heavily on throttle control.

_____________________________________________________________________________________________________________________________________________________________

Once these two main categories are defined, lets jump into different types of subcategories:

Classic Dirt Tracks

Off Road tracks get major points for their “Cool Factor”. Speed is less prominent as these tracks are filled with obstacles. The fun is maneuvering around those roadblocks to get the fastest lap time.

As a negative, these tracks are really costly for vehicles. Extensive maintenance after race is required so your buggy or truck is in top shape for next competition.

If not cleaned, dust can mess up your engine. Tires also need to be changed as high wear and tear can happen. Before race, these tracks usually get watered to keep the dust and gravel settled.

Clay Tracks

Are you tired of getting too dirty? You can look at clay tracks! Closely related with dirt tracks, clay tracks are usually made of a mixture of clay and sand, sometimes 70% clay and 30% sand. It is basically just like dirt in a baseball field.

Sometimes clay tracks can get holes and lumps after races, to avoid that calcium compounds can be used to hold the surface together better. Many high racing circuits prefer clay over dust so you should definitely check out clay racing.-

Carpet Tracks

Normal indoor carpet usually is not suitable as it causes fuzz and carpet will not last much long. Carpet tracks are also a lot easier to be setup and removed. Other good brand carpet tracks include Fast Track, Daytona and Rubber back carpet.

Ozrite carpet has special anti static feature which prevents electricity build up and thus it works great for electric cars flying on high speeds.

AstroTurf

AstroTurf or artificial grass which is popular in Hockey, Football and other sports fields has made its way finally to R/C racing.

It is very surprising as the track for recent IFMAR (International Federation of Model Auto Racing) championship held in Japan was complete green AstroTurf. This is the first time a grand scale championship has happened on AstroTurf.

Your cars and trucks stay relatively clean and little to no cleaning is required on cars after any race. Traction grip is great and you can easily race on wet outdoor tracks.

Sugar Coated Tracks

Latest technique on the horizon sugar coated tracks provides extreme traction. Water prepared sugar when sprinkled on dirt provides more traction than laundry detergents and tracks with diesel fuels.

-

Tips on Medical Product Development

The medical product development process involves complicated processes, such as attentive planning and analysis, comprehensive systematic documentation, daily reporting, medical product design and at the same time adhering to definite controls and legalizations and numerous industry standards and laws. Therefore, the entire process can be a continuous iteration of setbacks, if you lack the knowledge on the basics of medical product development or do not take certain steps to ensure project success.

Are you facing trouble in creating a successful product as well? If so, then consider reading these simple tips on medical product development:

Assess Project Requirements – Know What You Should Know

Before beginning any medical product development process, it is imperative for you to look at the project requirements. This way, you can ensure you do not end up creating a total disaster on a short timeframe with limited funds. Please note that project analysis is the most important part of the medical product development process.

Therefore, gather as much knowledge as possible to limit your exposure to costly surprises and to avoid mistakes that might result in the failure of your project in the future.

Plan Carefully – Avoid Regulatory Red Tape

When it comes to successful medical product development, it is essential to keep an eye on each process. Therefore, make sure to plan carefully and avoid rushing into each process, as this can negatively affect the whole development process. It can also make way for regulatory red tape, which can bring your project to a permanent stop. To prevent this, plan each step and work with the medical regulatory personnel from the beginning of the process. This way, you can steer your project in the right direction from day one.

Team Work – The Key to Success

As mentioned earlier, medical product development is an incredibly complicated process. Even a single mistake can result in the failure of the project in the future. To keep this from happening, make sure to work and cooperate with your team. If you feel your engineering team is not capable of delivering what they said, look for another one. In fact, do your own homework and look for people who have worked on similar projects before. This way, you can avoid any pitfalls halfway through your project.

Medical Products – Introduction at Global Level

A person can make medical product related injury claim if one has suffered injuries due to defective or dangerous medical appliances, equipment, organ transplants, prosthetic devices, surgical implants, surgical equipment, hospital supplies, diagnostic equipment, and hearing and visual aids. Any of these products can be the subject of a medical products liability lawsuit if the cause injury to a patient. One must consider the statute of limitations (the time limit for bringing a lawsuit) before making a claim. All states allow a fixed period of time in which to bring a suit, but in many cases involving defective medical products a significant period of time can elapse between a patient’s exposure to a defective product and the patient’s awareness of the injury.

As in other products liability cases, plaintiffs in medical product cases sometimes raise the issue of the manufacturer’s or other provider’s failure to warn about the potential dangers of their products. The manufacturers of such types of products can fulfill their duty by providing the warnings to the physicians, nurses, or other medical personnel who will be using the products, and then the duty passes to those professionals to inform the patient. There is a subtle difference fine line between a products liability action involving a defective medical device and a medical malpractice action. Only an experienced lawyer having expertise in this field can help both plaintiffs and defendants determine which law applies.

Making medical injury claims is surely not an easy task. To determine whether you have been injured medically, your solicitor must prove that the injury resulted due to the negligence of the other person. Many clinical procedures carry certain amount of risk which should be explained to the patient in advance. An injury that is considered medically inflicted can also result from incorrect medicine, whether the wrong type or the wrong dosage. Hence, seeking professional help can prove to be very helpful. It can ease the task of making a claim.

Many people suffer minor head injuries such as cuts, bumps and bruises, and make a full recovery without any lasting problems. However, some head injuries can be much more serious. The symptoms of a brain injury are classified as mild, moderate or severe, depending on the damage to the brain. Some of the symptoms of minor damage may are change in the sense of taste, touch or smell, or slight memory or speech problems. If the head violently hits an object, perhaps in a road accident or during an assault, this can result in a traumatic brain injury. The brain can also be damaged if something penetrates the skull. Sometimes babies suffer brain damage during birth, resulting in cerebral palsy. Any person who has suffered such an injury can make Head and brain injury claims.

The Importance Of Medical Products

Medical products are an important part of very person’s life. We all have the threat of getting sick, whether it is just a common cold, or a chronic disease like cancer. In order to survive these attacks on our bodies, no matter how serious, we need to take a certain amount of medicine in order for our bodies to overcome the attack. There are thousands and thousands of different types of medicine available in the world today, all developed for different illnesses and diseases.

There are different ways to acquire the needed medical products to treat a person’s illness or disease. The most common of all of these will be to go directly to a pharmacy or chemist. If the illness is something like a common cold or flue, medicine can be acquired directly form the chemist by just telling them the symptoms you are having. They will then, based on your description, give you the necessary medicine to treat your illness. However, if you have something more serious or complex, you will have to go see your general practitioner first. They will then examine you and determine your illness based on the results of the different tests they ran on you. You will then receive a prescription from the doctor that will allow you to get the needed medicine from the chemist or pharmacy. However, if the doctor feels that your medical state is too serious or advanced, they will have to admit you to a hospital, where you will be treated with different medicines and will probably undergo more tests as well.

A person can also obtain medicine by ordering it online. However, it is important to remember the dangers and possibilities that may arise when doing this. Potential dangers to keep in mind when purchasing online is: the internet can be a great source of information, but it can also be deceiving. Anyone in the world can put up information on the internet that might not necessarily be true. So remember that even though some sites may look reputable, looks can be deceiving. You need to investigate the site first before risking serious problems by buying the medicine, taking them and either ending up in a worse condition, or not being affected by the medicine at all. It can also be illegal to purchase medicine online. Yes, some sites do have licenses and the necessary ‘go-ahead’ from the different authorities enabling them to sell medicine online, but some do not. Once again, it is vitally important to do the necessary investigation and research on the site before purchasing from them.

Medical products today are more easily available than ever before and can be obtained by almost anyone, in various different ways. It is important, however, to always make sure that you stay within the law and that you make sure you get the right medicine for you. The consequences of not doing so can be very heavy. Yes, medicine is essential in anyone’s life, but it can be harmful too, so be careful.